Posted by Mark A. Jacob (66.63.227.213) on January 04, 2004 at 19:31:03:
In Reply to: Re: Bulb Help Bell & Howell 253 R posted by John Smith on November 09, 2003 at 08:06:19:
: : If it needs a 4-pin base lamp then you use either a "DFA" or "DFN/DFC" bulb.
: There are 4 holes at where the bulb sits in the projector - but only 2 of them seem to have electrical contacts.
: http://www.topbulb.com/find/Product_Description.asp?intProductID=43648
: would this bulb collide with my projectors "500 Watt" "requirement"? (the details here say this bulb is 125 volts/150 watts)
: thanks again
I have a Bell & Howell projector 253** it takes a 500 watt,DAK or DAY the base is called G17q it has a center alinement post with 4 other contact pins, and a blue coated top. Ebay has several of these bulbs. call me if you have any questions.
979/278-3266
end of archived message